{"ok":true,"columns":["Report ID","Submitted UTC","Reported Local Time","Page URL","Page Title","Page Version","Browser","Operating System","Screen Size","Description","Steps to Reproduce","Expected Behavior","Actual Behavior","Contact Email","Resolved","Resolution Comments","Resolution Updated UTC","Reporter User","Reporter Semester","Reporter Section","Reporter Team"],"records":[{"Report ID":"0475f43f8a0fcff8","Submitted UTC":"2026-10-23T14:34:23Z","Reported Local Time":"10\/23\/2026, 8:34:14 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"A0 should be constant","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:19:06Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"0830b4b2024974c4","Submitted UTC":"2026-11-03T17:11:08Z","Reported Local Time":"11\/3\/2026, 10:07:41 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d435635ee358","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Maksym Chelko, Fall 26 - T3\/A","Steps to Reproduce":"on the aircraft view, the inlets seems to attach to the aft section of the engine, not the compressor face of the engine","Expected Behavior":"the inlets should connect to the front of the engine to create the serpentine inlet shape","Actual Behavior":"the inlets attach to the rear of the engine not the front","Contact Email":"C27MAKSYM.CHELKO@AFACADEMY.AF.EDU","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Maksym Chelko","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"A"},{"Report ID":"0ca9d994acd88e04","Submitted UTC":"2026-10-23T16:16:42Z","Reported Local Time":"10\/23\/2026, 10:16:32 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Jack Casciano, Fall 26 - M3\/A | Internal Design still doesn't save when project is saved.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T15:56:12Z","Reporter User":"Jack Casciano","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"A"},{"Report ID":"0da404e600517c30","Submitted UTC":"2026-10-23T14:48:35Z","Reported Local Time":"10\/23\/2026, 8:48:18 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"mission stretch in column and fuel bar graphs","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"0f226db4c8a964e7","Submitted UTC":"2026-10-19T17:09:43Z","Reported Local Time":"10\/19\/2026, 11:08:56 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Fitz, Fall 26 - M3\/C | Changing inlet \"2\" position is undon despite saving","Steps to Reproduce":"Go to geometry, click inlet, move point \"2\", save, change tabs, return","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T13:58:10Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"11bb6321ee1d1cea","Submitted UTC":"2026-10-21T16:28:32Z","Reported Local Time":"10\/21\/2026, 10:22:58 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"Fuselage only allows one cross section shape","Steps to Reproduce":"Fuselage design","Expected Behavior":"Should be able to transition from chine or square to round section, etc. as the inlet does, addressable by cross section, as an option.","Actual Behavior":"Entire fuselage has same cross section shape, oval square, chined, or trapezoid.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"14734706a1f7af3c","Submitted UTC":"2026-10-21T16:10:36Z","Reported Local Time":"10\/21\/2026, 10:06:49 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"Couldn't save mission to cloud","Steps to Reproduce":"Mission Analysis","Expected Behavior":"Save mission to cloud\/digital twin, load mission from cloud\/twin","Actual Behavior":"Could only save\/load mission to\/from disk.","Contact Email":"","Resolved":"true","Resolution Comments":"added","Resolution Updated UTC":"2026-10-21T23:38:29Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"155eb73f931b1042","Submitted UTC":"2026-10-19T17:14:02Z","Reported Local Time":"10\/19\/2026, 11:13:17 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Jack Casciano, Fall 26 - M3\/A","Steps to Reproduce":"In the internal design tab, the commit design tab did not work properly (didn't save my work).","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed... I think!","Resolution Updated UTC":"2026-10-22T00:15:54Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"1599e7f843213498","Submitted UTC":"2026-11-02T23:40:44Z","Reported Local Time":"11\/2\/2026, 4:38:55 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=68ceb9fd0b77","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.125 \u00b7 2026-11-02","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"CDo is only listed for subsonic","Expected Behavior":"CDo, k1, and k2 listed as a function of Mach number. Very important when designing supersonic aircraft.","Actual Behavior":"Only one CDo listed, presumably subsonic.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"brandtsa","Reporter Semester":"Fall 26","Reporter Section":"T1","Reporter Team":"A"},{"Report ID":"15dde453bbaf7d1f","Submitted UTC":"2026-10-16T19:47:46Z","Reported Local Time":"10\/16\/2026, 1:46:11 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.13 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Weight models are reported to the nearest pound, can we have all the text boxes be reconfigured to 3 or 4 significant digits?","Steps to Reproduce":"upload any aircraft in beta, then open the weight tab in the analysis section.","Expected Behavior":"3-4 sig figs to get numbers more precise","Actual Behavior":"only showing 1 (to nearest pound)","Contact Email":"","Resolved":"true","Resolution Comments":"added","Resolution Updated UTC":"2026-10-22T01:44:15Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"183be909994b52b2","Submitted UTC":"2026-10-20T21:24:05Z","Reported Local Time":"10\/20\/2026, 3:20:29 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.348 \u00b7 2026-10-20","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Fregoso, Fall 26 - T5\/C","Steps to Reproduce":"Open landing gear tab","Expected Behavior":"Change angle of the struts of main landing gears, similar to MQ-1 Predator.","Actual Behavior":"Main landing gears \"half-track\" can only be changed and cannot change where gears attach to the fuselage","Contact Email":"","Resolved":"true","Resolution Comments":"they can.  it is called \"Z attach\"","Resolution Updated UTC":"2026-10-22T02:54:41Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"1ac353c890d1f1d0","Submitted UTC":"2026-10-22T19:11:05Z","Reported Local Time":"10\/22\/2026, 1:10:42 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Hermes, Fall 26 - T5\/A","Steps to Reproduce":"Open internal design","Expected Behavior":"See internal design","Actual Behavior":"Error: Unable to prepare a closed propulsion cutout.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Hermes","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"A"},{"Report ID":"1b4243d8b810628d","Submitted UTC":"2026-10-15T22:54:56Z","Reported Local Time":"10\/15\/2026, 4:54:24 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"in the Weight tab you cannot change the x, y, or z position of some values, like fuel or payload.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-16T02:17:35Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"200e4b83142cd3f2","Submitted UTC":"2026-10-23T14:53:09Z","Reported Local Time":"10\/23\/2026, 8:52:36 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"move gear in internal","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:13:53Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"22dba2cfc16e92c2","Submitted UTC":"2026-10-23T14:30:29Z","Reported Local Time":"10\/23\/2026, 8:30:01 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"vorview sweep mach and show NP.  capture fuselage","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-26T15:56:47Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"2923a2683a523ced","Submitted UTC":"2026-10-19T16:49:54Z","Reported Local Time":"10\/19\/2026, 10:48:57 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Kirsten Lee, Fall 26 - M3\/A","Steps to Reproduce":"Can you make the legends on the lift curve slope editable? I am trying to compare at a different point","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"2a220094e2cdd971","Submitted UTC":"2026-10-30T17:09:17Z","Reported Local Time":"10\/30\/2026, 11:06:11 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.61 \u00b7 2026-10-29","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"macOS","Screen Size":"1512 x 982","Description":"Preston, Fall 26 - T3\/B | Wind tunnel data reduction won't give me Clb or Cnb plots.","Steps to Reproduce":"Opened wing tunnel data reduction; Loaded in Beta low speed wind tunnel data (downloaded on computer); only 3 plots appeared.","Expected Behavior":"Shows me yawing and rolling moment plots","Actual Behavior":"Stopped at pitching moment plot","Contact Email":"C27Preston.Phillips@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Preston","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"B"},{"Report ID":"2a3cb35fbe319a02","Submitted UTC":"2026-10-30T19:17:59Z","Reported Local Time":"10\/30\/2026, 1:15:07 PM","Page URL":"https:\/\/jet-central.com\/JETcentral\/Main.html?v=d176dc5ae816","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.61 \u00b7 2026-10-29","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Risk chart","Expected Behavior":"Likelihood should be on the vertical axis so that mitigation (which usually can only reduce likelihood) will move the risks downward on the chart.  That is why it is called a risk burndown chart.","Actual Behavior":"Likelihood is on the horizontal axis, so it becomes a risk burn-over chart...not ideal.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"brandtsa","Reporter Semester":"Fall 26","Reporter Section":"T1","Reporter Team":"A"},{"Report ID":"2b92c9addd9687c3","Submitted UTC":"2026-10-22T19:03:45Z","Reported Local Time":"10\/22\/2026, 1:02:05 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"not necessarily a bug, but our three fuel tanks are in a line, and the weight model tab doesn't allow me to separate fuel tanks 2 and 3. they are forced to have the same location data.","Steps to Reproduce":"upload a plane, weight model tab, adjusting fuel 2 and 3 xyz location","Expected Behavior":"independently move all 3 fuel tanks","Actual Behavior":"1 is independent, 2 and 3 are locked together","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"c27joseph.duran@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"2c08f8e365f05391","Submitted UTC":"2026-10-15T20:54:51Z","Reported Local Time":"10\/15\/2026, 2:54:23 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"Digital Twin should allow names like the normal \"Save as\" Does.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"this is deliberate so that instructors don't have to wade through 100 different naming conventions for your digital twins.  I will add the avility to add notes to digital twins when saving.","Resolution Updated UTC":"2026-10-16T00:37:18Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"2c3e5b71715c667f","Submitted UTC":"2026-10-19T14:52:09Z","Reported Local Time":"10\/19\/2026, 8:51:38 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Ethan, Fall 26 - M1\/A","Steps to Reproduce":"IYY not importing from overwritten values to the JSON model into FQ","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"2de672c8a0b1c659","Submitted UTC":"2026-10-21T16:34:37Z","Reported Local Time":"10\/21\/2026, 10:32:29 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Tucker Rice, Fall 26 - M3\/A","Steps to Reproduce":"Flying Cooper Harper Ratings in the sim with Jasmine 2.0.","Expected Behavior":"We need data traces for handling qualities, but there isn't a function within the sim to get the required traces.","Actual Behavior":"Add somewhere to get data traces please.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"2e84c7825ad87fc6","Submitted UTC":"2026-10-23T16:29:08Z","Reported Local Time":"10\/23\/2026, 10:27:49 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Tucker Rice, Fall 26 - M3\/A","Steps to Reproduce":"In the flying qualities it is unclear which is the Jet prediction for damping ratio and natural frequnecies, etc and what is the calculated values from the Handling qualities from the website.","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"changed","Resolution Updated UTC":"2026-10-26T15:56:03Z","Reporter User":"Tucker Rice","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"A"},{"Report ID":"3117fd66e54854ec","Submitted UTC":"2026-10-21T16:09:12Z","Reported Local Time":"10\/21\/2026, 10:06:49 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Mission Analysis","Expected Behavior":"Option to expand mission diagram to entire width of screen.","Actual Behavior":"Mission diagram not wide enough. Leg names overwrite each other. Can't read. Height is good.","Contact Email":"","Resolved":"true","Resolution Comments":"leg names can slide around.  double click the plot and it goes to full screen.  I'll make it landscape in full screen","Resolution Updated UTC":"2026-10-22T02:06:17Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"31c42cc2f17d2d77","Submitted UTC":"2026-10-15T15:17:36Z","Reported Local Time":"10\/15\/2026, 9:14:57 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/154.0.0.0 Safari\/537.36 Edg\/154.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Iyy was reading 0 causing a high frequency pitch control. Our model is the small UAS quadcopter. The sim also had an issue of giving 700lbf of thrust when moving the engine forward which was done in order make the aircraft pitch stable.","Steps to Reproduce":"Use the small aircraft with strakes","Expected Behavior":"With the SM of 5.4% the lbf was 16 as expected but moving the engine changed it.","Actual Behavior":"700lbf and Iyy reading inaccurately","Contact Email":"","Resolved":"true","Resolution Comments":"adding a new cape to make small RC planes easier","Resolution Updated UTC":"2026-10-22T02:00:08Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"32b5d6a65eebf9d2","Submitted UTC":"2026-10-27T14:57:05Z","Reported Local Time":"10\/27\/2026, 8:56:43 AM","Page URL":"https:\/\/jetdesign.online\/","Page Title":"AE 481 \u00b7 Aircraft Design Learning Hub","Page Version":"","Browser":"Mozilla\/5.0 (iPhone; CPU iPhone OS 18_7 like Mac OS X) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/27.0.1 Mobile\/15E148 Safari\/604.1","Operating System":"iPhone","Screen Size":"428 x 926","Description":"Jet predictions in wt analysis seem off","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"33ddb0b1abf7d3cb","Submitted UTC":"2026-10-21T15:17:22Z","Reported Local Time":"10\/21\/2026, 9:16:59 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"Wraith, Fall 26 - M1\/B | For the flight sim you said to report a bug to create an initial flight condition for taking off on the runway","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"34314a819b93dd42","Submitted UTC":"2026-10-22T21:24:02Z","Reported Local Time":"10\/22\/2026, 3:23:40 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Fregoso, Fall 26 - T5\/C","Steps to Reproduce":"Attempt to make small model","Expected Behavior":"Make small model","Actual Behavior":"This error: \"Solid volume has not converged within 3%. Check the airframe geometry before applying Small Model.\"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Fregoso","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"37b557d9db36d348","Submitted UTC":"2026-10-28T21:05:34Z","Reported Local Time":"10\/28\/2026, 3:05:31 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=cc8826c6b97c","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.41 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Manning Puska, Fall 26 - T5\/C | Error: Unable to prepare a closed propulsion cutout.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Manning Puska","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"3a9f356229c3fc51","Submitted UTC":"2026-10-21T16:17:02Z","Reported Local Time":"10\/21\/2026, 10:16:43 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Jack Casciano, Fall 26 - M3\/A","Steps to Reproduce":"armament is 0 in jetcentral but showing up in internal","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"3e7d16e1ee60edc1","Submitted UTC":"2026-10-28T19:39:17Z","Reported Local Time":"10\/28\/2026, 1:39:05 PM","Page URL":"https:\/\/jetdesign.online\/","Page Title":"AE 481 \u00b7 Aircraft Design Learning Hub","Page Version":"","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/26.6 Safari\/605.1.15","Operating System":"MacIntel","Screen Size":"1024 x 1366","Description":"Add fuel tanks etc on openvsp","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"3ee99499014e029f","Submitted UTC":"2026-10-19T07:17:41Z","Reported Local Time":"10\/19\/2026, 1:17:15 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"when internal design is started, the fuel proportions on the weight widget lock up","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-24T16:33:40Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"3fe7953938f5da66","Submitted UTC":"2026-10-21T16:58:34Z","Reported Local Time":"10\/21\/2026, 10:58:00 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Jack Casciano, Fall 26 - M3\/A","Steps to Reproduce":"Internal Design is having issues saving","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-24T15:45:49Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"41296ad5401d8134","Submitted UTC":"2026-10-22T19:14:29Z","Reported Local Time":"10\/22\/2026, 1:14:00 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"c27benjamin.homan@afacademy.af.edu, Fall 26 - T5\/B","Steps to Reproduce":"Can I have a search bar to find the tools I need easier.","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"created an AI agent to help with that (helmet in the top right, coming soon)","Resolution Updated UTC":"2026-10-24T15:44:23Z","Reporter User":"c27benjamin.homan@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"4ac20353274baa17","Submitted UTC":"2026-10-23T14:08:12Z","Reported Local Time":"10\/23\/2026, 8:07:37 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"engine bay instead of fairing. fuselage frames instead of stations","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:22:13Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"4cede66e980d903a","Submitted UTC":"2026-10-28T22:04:24Z","Reported Local Time":"10\/28\/2026, 4:03:54 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=cc8826c6b97c","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.41 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/26.6 Safari\/605.1.15","Operating System":"MacIntel","Screen Size":"1024 x 1366","Description":"HAVOC, Fall 26 - M1\/D |  | Jet2cad save as on Mac\/safari","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-30T04:11:47Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"4f8f9dcd861450ef","Submitted UTC":"2026-10-21T14:58:53Z","Reported Local Time":"10\/21\/2026, 8:57:18 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"V-n diagram","Expected Behavior":"\"Structural Limits\" should be labeled \"Limit Loads\" to be consistent with \"Ultimate Loads\" label","Actual Behavior":"Structural Limit","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"51025b82d71ddd39","Submitted UTC":"2026-10-19T20:02:12Z","Reported Local Time":"10\/19\/2026, 1:58:40 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"2560 x 1440","Description":"make bug report close when bug entered","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-19T23:42:27Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"547fa05b3508060d","Submitted UTC":"2026-10-26T20:46:08Z","Reported Local Time":"10\/26\/2026, 2:44:32 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.716 \u00b7 2026-10-25","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"c27benjamin.homan@afacademy.af.edu, Fall 26 - T5\/B","Steps to Reproduce":"Go to wind tunnel model. Load data and correction and click apply correction.","Expected Behavior":"It would apply the correction.","Actual Behavior":"It applies when you load the correction but when you click apply this correction it unapplies","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"c27benjamin.homan@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"562960cc13ba5820","Submitted UTC":"2026-10-30T19:44:08Z","Reported Local Time":"10\/30\/2026, 1:42:28 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d176dc5ae816","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.61 \u00b7 2026-10-29","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"c27joseph.duran@afacademy.af.edu, Fall 26 - T5\/B | my aircraft says it no longer closes. two lessons ago, it worked just fine and we could test things and move points around, but now it gives an error \"Error: Unable to prepare a closed propulsion cutout.\" I made no change that led to this, it just started that way when I came to class Wednesday.","Steps to Reproduce":"Upload THE_OTHER_ONE version 1 from my cadet email's tab. It does not work at all","Expected Behavior":"Open and use widgets to adjust design, etc.","Actual Behavior":"\"Error: Unable to prepare a closed propulsion cutout.\"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"c27joseph.duran@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"565b3be08f014a3c","Submitted UTC":"2026-10-28T21:10:26Z","Reported Local Time":"10\/28\/2026, 3:10:01 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=cc8826c6b97c","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.41 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Manning Puska, Fall 26 - T5\/C | calibrated residual is throwing the inertial moments off","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-30T04:12:50Z","Reporter User":"Manning Puska","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"59631ed8ce060dac","Submitted UTC":"2026-11-03T21:29:11Z","Reported Local Time":"11\/3\/2026, 2:29:05 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d435635ee358","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Jo, Fall 26 - T5\/A | ror: MachExponent must be a finite number >= 0","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Jo","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"A"},{"Report ID":"5b847600aa3ab90b","Submitted UTC":"2026-10-15T16:59:52Z","Reported Local Time":"10\/15\/2026, 10:58:30 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/26.6.2 Safari\/605.1.15","Operating System":"MacIntel","Screen Size":"1470 x 956","Description":"I am unable to save my plots for the wind tunnel data. I am unsure if this is a Mac issue; I will bring my government computer next time and try to get it fixed in there.","Steps to Reproduce":"Revise the \"save plot\" and \"Save to disk\" buttons in the wind tunnel analysis as neither are working currently.","Expected Behavior":"a plot to download or to save something to my computer","Actual Behavior":"nothing","Contact Email":"","Resolved":"true","Resolution Comments":"is a Safari thing.  should work now","Resolution Updated UTC":"2026-10-22T01:38:19Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"5be80ffa39db6f11","Submitted UTC":"2026-10-28T15:15:46Z","Reported Local Time":"10\/28\/2026, 9:15:03 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=1a2c2aaaf5c0","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.37 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"Dynamic pressure on VN diagram is only in increments of 10","Steps to Reproduce":"Try to input 2166 psf","Expected Behavior":"It changes to 2166","Actual Behavior":"Flags and error and tells you to pick 2160 or 2170","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"InstructorTest","Reporter Semester":"AE210","Reporter Section":"INSTRUCTORTEST","Reporter Team":"A"},{"Report ID":"5da4083df35d5d40","Submitted UTC":"2026-10-21T15:11:24Z","Reported Local Time":"10\/21\/2026, 9:10:51 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"AnnabelleTowles, Fall 26 - M1\/B","Steps to Reproduce":"We would love an option to be able to report the requirements traceability matrix from the spreadsheet template.","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"Added","Resolution Updated UTC":"2026-10-21T23:40:19Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"607b1a76a1363ef8","Submitted UTC":"2026-10-15T22:53:45Z","Reported Local Time":"10\/15\/2026, 4:52:57 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"Dry Mach exponent E <0 breaks the simulator but is possible with some aircraft.","Steps to Reproduce":"change Dry Mach exponent Eto be negative, try to open JetSim","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"could not reproduce.  email me if this is still happening for you michael.nielsen.ctr@afacademy.af.edu","Resolution Updated UTC":"2026-10-16T00:39:23Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"60afa4bcfd362452","Submitted UTC":"2026-11-03T18:17:13Z","Reported Local Time":"03\/11\/2026, 11:15:13","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d435635ee358","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Saverio, Fall 26 - T3\/C | The values for fuel deficit\/surplus do not match in the Analysis and Design Summary tabs. The analysis has a surplus, and the design summary reports a deficit.","Steps to Reproduce":"","Expected Behavior":"They should match","Actual Behavior":"They don't match","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Saverio","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"C"},{"Report ID":"63ede01faeff043b","Submitted UTC":"2026-10-23T16:42:54Z","Reported Local Time":"10\/23\/2026, 10:41:58 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Kirsten Lee, Fall 26 - M3\/A","Steps to Reproduce":"Allow the cadets to access the imported wind tunnel data in their folder in the wind tunnel tool","Expected Behavior":"","Actual Behavior":"done","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-23T19:56:25Z","Reporter User":"Kirsten Lee","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"A"},{"Report ID":"64027a117f630941","Submitted UTC":"2026-11-02T21:22:28Z","Reported Local Time":"11\/2\/2026, 2:20:53 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=68ceb9fd0b77","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.125 \u00b7 2026-11-02","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Cnbeta and Clbeta are 100x too large","Expected Behavior":"Values around .002 for Cnbeta and slightly negative for Clbeta","Actual Behavior":"Cnbeta = 0.35, Clbeta = -0.187","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"brandtsa","Reporter Semester":"Fall 26","Reporter Section":"T1","Reporter Team":"A"},{"Report ID":"66a7ae6bb898169a","Submitted UTC":"2026-10-20T21:17:19Z","Reported Local Time":"10\/20\/2026, 3:15:53 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d53607a7d449","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.348 \u00b7 2026-10-20","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Dawson, Fall 26 - T5\/B | Internal arrangement tool unable to appropriately model multiple internal fuel tanks not next to each other. Additionally, currently only able to have 1 fuel tank and 2 wing fuel tanks","Steps to Reproduce":"Use the tool","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"66f97ca1c992de32","Submitted UTC":"2026-10-14T20:41:09Z","Reported Local Time":"10\/14\/2026, 2:40:16 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"weight model is wrong and i can't edit fuel weight","Steps to Reproduce":"open weight tab, and try to adjust fuel","Expected Behavior":"text box fills in with number inputted","Actual Behavior":"does nothing at all","Contact Email":"","Resolved":"true","Resolution Comments":"fixed with addition of manual entry and sliders","Resolution Updated UTC":"2026-10-16T00:42:32Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"682b307686ecc29a","Submitted UTC":"2026-10-23T16:56:40Z","Reported Local Time":"10\/23\/2026, 10:53:51 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Joe, Fall 26 - M3\/B |  | In internal design, the control surfaces are not shown in any of the views and our horizontal V tails are not visible in the 3D view even though the wing is visible and they are visible in the side, top and front views","Steps to Reproduce":"done","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-23T19:46:40Z","Reporter User":"Joe","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"B"},{"Report ID":"68b9eeb0d54c70a7","Submitted UTC":"2026-10-23T13:56:02Z","Reported Local Time":"10\/23\/2026, 7:55:57 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"scarf fix","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T15:57:38Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"71a3c94f2cfa9398","Submitted UTC":"2026-10-23T16:30:30Z","Reported Local Time":"10\/23\/2026, 10:29:04 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Joe, Fall 26 - M3\/B | In the internal design portion, the side view has dimensions shown, but the top and front view do not have dimensions shown at all for pictures of a three-view design.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:03:33Z","Reporter User":"Joe","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"B"},{"Report ID":"73d8f8a8164f8ff0","Submitted UTC":"2026-10-21T15:12:57Z","Reported Local Time":"10\/21\/2026, 9:12:48 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Ethan, Fall 26 - M1\/C |  | Rudder Visual on sim","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T13:50:04Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"75f63ff2a3f0a745","Submitted UTC":"2026-10-23T14:06:57Z","Reported Local Time":"10\/23\/2026, 8:06:42 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"engine needs to cut fuel","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:26:02Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"765b6b9ddeb13a44","Submitted UTC":"2026-10-13T21:36:11Z","Reported Local Time":"10\/13\/2026, 3:35:37 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/JETcentral.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.313 \u00b7 2026-10-13","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/27.0 Safari\/605.1.15","Operating System":"MacIntel","Screen Size":"1920 x 1080","Description":"EVERYTHING!","Steps to Reproduce":"None","Expected Behavior":"Chaos","Actual Behavior":"Havoc","Contact Email":"","Resolved":"true","Resolution Comments":"get over it!","Resolution Updated UTC":"2026-10-16T00:04:56Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"7a68a6823d22ea88","Submitted UTC":"2026-10-26T23:15:39Z","Reported Local Time":"10\/26\/2026, 5:13:54 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.716 \u00b7 2026-10-25","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"matt, Fall 26 - M1\/D | Wind Tunnel Model Generator supports do not support leading edge flaps properly when deflected.","Steps to Reproduce":"deflect leading edge flaps and examine if the support is making contact with the wing","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"matt","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"7b28a4ac848ef376","Submitted UTC":"2026-10-21T16:42:36Z","Reported Local Time":"10\/21\/2026, 10:35:22 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Weight and Balance Tab","Expected Behavior":"Fuel 2 and 3 should be separate items. Wing fuel right and left have same x cg so no point using two fuel locations. Then can use fuel 3 for another tank","Actual Behavior":"Fuel 2 and 3 are used for left and right wing tanks = redundant","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"7cae3dbb203124bd","Submitted UTC":"2026-10-15T22:55:34Z","Reported Local Time":"10\/15\/2026, 4:54:24 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"in the weight tab, please add the ability to change the weight of fuel in each fuel tank (instead of them all being 1\/3 of the total fuel)","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"that is what the slider does.  added a second slider to allow more options","Resolution Updated UTC":"2026-10-16T00:17:31Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"7d35932796f1d226","Submitted UTC":"2026-10-28T15:08:53Z","Reported Local Time":"10\/28\/2026, 9:08:36 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=1a2c2aaaf5c0","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.37 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"Adding new payload and bays within Internal Design","Steps to Reproduce":"'-I tried to add more AIM120s (green color) and increase the size of the existing bay (red color) | -There is a (red) AIM 120 labeled as External Payload in the existing (red) bay-- if you increase the size of the bay to try to make room for the new (green) AIM 120, the red AIM 120 stays centered. Should adding a new weapon also come with the outerline of the bay? Or should I expand the existing bay size? If so, the default red AIM120 should be able to be moved around without shifing the bay.","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"InstructorTest","Reporter Semester":"AE210","Reporter Section":"INSTRUCTORTEST","Reporter Team":"A"},{"Report ID":"81429de6ed29f9ca","Submitted UTC":"2026-10-20T16:18:18Z","Reported Local Time":"10\/20\/2026, 10:16:48 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"ZachT, Fall 26 - T3\/C |  | In the internal design feature would it be possible to have more complex geometry shapes for fitting payloads within the fuselage. Also I think there's a bug between the different views. Top and side view make stuff look like its going to fit, but if I go to the front or 3D view stuff doesn't look like it fits within the fuselage","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"side view does not account for a chined fuselage so it may fit vertically but not laterally.","Resolution Updated UTC":"2026-10-26T16:23:47Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"818c56fd610aa9a6","Submitted UTC":"2026-10-21T14:57:28Z","Reported Local Time":"10\/21\/2026, 8:57:14 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"christian demaster smith, Fall 26 - M1\/A","Steps to Reproduce":"Allow more zooming for small aircraft","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"solved","Resolution Updated UTC":"2026-10-22T02:53:04Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"81c1e21352d4f4b6","Submitted UTC":"2026-10-16T17:25:28Z","Reported Local Time":"10\/16\/2026, 11:24:38 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.13 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | Please add control movements for inlet positions","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"you click on them and drag the control points (1 and 2)","Resolution Updated UTC":"2026-10-24T16:33:05Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"8291fa4a915a4157","Submitted UTC":"2026-10-19T15:23:39Z","Reported Local Time":"10\/19\/2026, 9:23:25 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Ethan, Fall 26 - M1\/C","Steps to Reproduce":"Pitch Damper Switch on Sim does not stay on when reloading the JSON","Expected Behavior":"Sim model - All dampers on - Save to JSON - Exit Sim - Reenter sim - All dampers still on","Actual Behavior":"Sim model - All dampers on - Save to JSON - Exit Sim - Reenter sim - Pitch Damper not on","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T16:22:45Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"84141ef37b911ed6","Submitted UTC":"2026-10-29T01:48:59Z","Reported Local Time":"10\/28\/2026, 7:45:58 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.44 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"macOS","Screen Size":"1710 x 1107","Description":"NutGresham, Fall 26 - Other\/A","Steps to Reproduce":"Changing engine type and weight resulted in differences between calculations in Analysis block and Design Summary. The Fuel surplus and Flyaway Cost both differed from each other at times..","Expected Behavior":"Fuel and Cost should match.","Actual Behavior":"Fuel and Cost differed.","Contact Email":"james.gresham@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"NutGresham","Reporter Semester":"Fall 26","Reporter Section":"Other","Reporter Team":"A"},{"Report ID":"87d1534b7a41ce68","Submitted UTC":"2026-10-21T16:25:41Z","Reported Local Time":"10\/21\/2026, 10:22:58 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"F-106 select oval vs chined fuselage","Expected Behavior":"Oval fuselage should refer to zchine and make similar cross section shape but with rounded rather than sharp chine corner","Actual Behavior":"Oval fuselage ignores zchine and makes fuselage cross section a simple oval.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"881232295c04760b","Submitted UTC":"2026-10-23T14:52:25Z","Reported Local Time":"10\/23\/2026, 8:52:17 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"potatoe in internal design","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:10:48Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"8a9f1902b431a2fe","Submitted UTC":"2026-10-14T17:05:41Z","Reported Local Time":"10\/14\/2026, 11:05:23 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Cannot move ailerons into the inner portion of the wing and overlay on the flaps","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"that is intentional.  it messes up the surface cutting in CAD.  if you want to overlay, just add one surface and map the simulator controls at act as flaperons","Resolution Updated UTC":"2026-10-16T00:44:50Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"8cbece37e20b5967","Submitted UTC":"2026-10-21T16:14:17Z","Reported Local Time":"10\/21\/2026, 10:14:07 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Jack Casciano, Fall 26 - M3\/A | Make liftoff reflect tailstrike.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"8dd57e02ea926c8a","Submitted UTC":"2026-10-28T15:08:34Z","Reported Local Time":"10\/28\/2026, 9:04:30 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=1a2c2aaaf5c0","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.37 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"'-In internal design, once a payload is added, you cannot delete it. (or I can't find the button)","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"Anna.mason@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"InstructorTest","Reporter Semester":"AE210","Reporter Section":"INSTRUCTORTEST","Reporter Team":"A"},{"Report ID":"929d7c7533f2a6a1","Submitted UTC":"2026-10-21T14:44:12Z","Reported Local Time":"10\/21\/2026, 8:43:47 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"lakshan, Fall 26 - M1\/A | Not updating stability and control values","Steps to Reproduce":"Not updating stability and control values","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"9812bd7ae3e42924","Submitted UTC":"2026-10-14T16:40:47Z","Reported Local Time":"10\/14\/2026, 10:40:36 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"SM Limits not moving","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-16T00:48:37Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"9a1e87e6d303268f","Submitted UTC":"2026-10-23T14:11:53Z","Reported Local Time":"10\/23\/2026, 8:11:26 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"wing weight need to add weight for actuators plumbing etc","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:22:04Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"9c21f18fe5f80b87","Submitted UTC":"2026-10-15T19:41:17Z","Reported Local Time":"10\/15\/2026, 1:40:54 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"2560 x 1440","Description":"pitch control weight factor resets to 0 when tail area = 0","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"should be fixed now","Resolution Updated UTC":"2026-10-16T00:52:42Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"9d93466a8c899d54","Submitted UTC":"2026-10-23T14:50:12Z","Reported Local Time":"10\/23\/2026, 8:48:34 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Ethan, Fall 26 - M1\/C | Saving digital twin does not save any of the damping ratios","Steps to Reproduce":"miniSim - set damping ratios - save to JSON - Save digital twin - Load new version of digital twin - minisim (or JSON editor) - damping ratios","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T15:56:35Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"9f305a117e583f77","Submitted UTC":"2026-10-26T20:27:48Z","Reported Local Time":"10\/26\/2026, 2:27:39 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.716 \u00b7 2026-10-25","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 30 - M1\/D |  | CG movement with internal changes is not consistent","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"HAVOC","Reporter Semester":"Fall 30","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"a21ad709a6f6db25","Submitted UTC":"2026-10-26T20:58:00Z","Reported Local Time":"10\/26\/2026, 2:55:52 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.716 \u00b7 2026-10-25","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"The calibrated residual values on the inertia tab are enormous and hugely adjust the Ixx, Iyy, and Izz values to thousands of times what they should be. I have no idea what the calibrated residual values are, what they do, or where they're pulled from. And they seemingly cannot be overriden.","Steps to Reproduce":"Upload aircraft, analysis, inertia tab, look at column second from the right.","Expected Behavior":"No idea","Actual Behavior":"Enormous added value that multiples inertia values to really high margins","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"c27joseph.duran@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"a3805eea9848ac29","Submitted UTC":"2026-10-28T02:24:06Z","Reported Local Time":"10\/27\/2026, 8:22:00 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.28 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 960","Description":"Non urgent-- axes not shifting or able to be adjusted on thrust vs velocity curve","Steps to Reproduce":"Shift the altitude slider bar for the thrust vs V curve. (As a note, you should have an option to add an image to the bug report)","Expected Behavior":"The axes shifts and picks a new grid increment as the velocity values increase","Actual Behavior":"Axes grid labels stack up","Contact Email":"anna.mason@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"InstructorTest","Reporter Semester":"AE210","Reporter Section":"INSTRUCTORTEST","Reporter Team":"A"},{"Report ID":"a5879f6c5d04d2ac","Submitted UTC":"2026-10-21T16:31:41Z","Reported Local Time":"10\/21\/2026, 10:28:56 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Fuselage design","Expected Behavior":"Square and trapezoid should allow radiused corners, as on real aircraft. Should also allow radius rather than sharp chine. Just add a box to input corner radius.","Actual Behavior":"Sharp corners.  No choice.","Contact Email":"","Resolved":"true","Resolution Comments":"radiused corners already exists on Square.  adding to trapezoid","Resolution Updated UTC":"2026-10-21T23:31:50Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"a5f05fa83d6db8a9","Submitted UTC":"2026-10-14T16:24:02Z","Reported Local Time":"10\/14\/2026, 10:23:20 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=ef9941cb1cf8","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"aileron sizing chart doesnt reflect that my design has elevons, not individual flaps and ailerons","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"must be ailerons not flaps for that to work.  if you want flaperons, use ailerons and map them in the sim as flaperons.","Resolution Updated UTC":"2026-10-16T00:52:14Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"a5f11728498112c8","Submitted UTC":"2026-10-22T20:33:53Z","Reported Local Time":"10\/22\/2026, 2:31:04 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Chine roundness works backwards. I need to round off the sharp corner of the chine like rounding the corners of the square or trapezoid. Need chine roundness slider to go the other way, too so you can round the chine or scoop it out.","Expected Behavior":"Round off sharper corner of chine","Actual Behavior":"Slider limits it to sharper corrner.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"aa03015c9398181d","Submitted UTC":"2026-10-15T19:38:11Z","Reported Local Time":"10\/15\/2026, 1:37:58 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"2560 x 1440","Description":"need to add extra gas for STTO","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"made to match JET with 30min of ground operations at idle power.","Resolution Updated UTC":"2026-10-16T00:35:21Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"acb0adc939b89bf3","Submitted UTC":"2026-10-22T20:28:15Z","Reported Local Time":"10\/22\/2026, 2:25:16 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Scarf inlets","Expected Behavior":"Looks like F-22 inlet, with inlet lips all swept at the same angle in planform. View F-22 from below to see what I mean.","Actual Behavior":"Doesn't look right. Sweeping in one plane seems to throw off sweeping in another plane.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"b8d7bedbf5fdf371","Submitted UTC":"2026-10-15T17:19:26Z","Reported Local Time":"10\/15\/2026, 11:18:44 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=e7721f4b50ff","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.472 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/150.0.0.0 Safari\/537.36 Edg\/150.0.0.0","Operating System":"macOS","Screen Size":"1512 x 982","Description":"Save Open Wind Tunnel Data: Can you please add a function to save open wind tunnel data in the cloud for all team members to open on their own devices?","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"they can do this in the teams files location.","Resolution Updated UTC":"2026-10-16T00:35:56Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"b95e5742353a4796","Submitted UTC":"2026-10-21T15:21:43Z","Reported Local Time":"10\/21\/2026, 9:20:24 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"HoQ had no minimize button","Expected Behavior":"To exit HoQ, minimize like exiting V-n or any other screen.","Actual Behavior":"Had to X out of it. But it did save the changes","Contact Email":"","Resolved":"true","Resolution Comments":"HoQ opens a separate page.  just close the window.  I elected to make those types of widgets pages to avoid bogging down the design workflow","Resolution Updated UTC":"2026-10-22T02:26:40Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"b986ff1b7ebb3338","Submitted UTC":"2026-10-21T15:15:46Z","Reported Local Time":"10\/21\/2026, 9:10:36 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"SAMPLE - F-106 v0.0 weight models (psf) are incorrect","Expected Behavior":"Should be same as Jet11.3_F-106_DCA.xlsm. I think we will always want to ingest Jet models with minimal effort. There are lots of them with which to build the JetCentral Library.","Actual Behavior":"Look like CCA weight models","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"bbaab346ad15dbe8","Submitted UTC":"2026-10-23T16:42:49Z","Reported Local Time":"10\/23\/2026, 10:41:15 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/150.0.0.0 Safari\/537.36 Edg\/150.0.0.0","Operating System":"macOS","Screen Size":"1512 x 982","Description":"Slider for mach on Predicted Drag Polar chart does not work properly","Steps to Reproduce":"Drag polar chart under Aero Performance section","Expected Behavior":"Slider shoul allow any mach number input","Actual Behavior":"Jumps from mach 0.8 to mach 1.07 with nothing inbetween.","Contact Email":"","Resolved":"true","Resolution Comments":"it is updating in the background.  that's why you see that.  I will see if I can make it faster, but nothing is wrong","Resolution Updated UTC":"2026-10-23T19:59:02Z","Reporter User":"Korbin","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"B"},{"Report ID":"bc2327a4b505c877","Submitted UTC":"2026-10-21T15:44:45Z","Reported Local Time":"10\/21\/2026, 9:41:15 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Flying Qualities tab","Expected Behavior":"List standards (freq and damping ratio? etc.) for each mode in data reduction.  Let cadet choose aircraft class and list Mil-F-8785 standard for that class. Compare and highlight compliance or failure.","Actual Behavior":"No standards listed","Contact Email":"","Resolved":"false","Resolution Comments":"coming.  right now the mil-std is distro C or D and I need to resolve if we can put it on the web.","Resolution Updated UTC":"2026-10-22T02:25:30Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"bcc82b840286f213","Submitted UTC":"2026-11-03T21:51:08Z","Reported Local Time":"11\/3\/2026, 2:50:21 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Pages\/FoamWing.html?aircraft=16ef563c-6363-4da0-b12c-95b52cabf5b3&v=d435635ee358","Page Title":"Foam Wing","Page Version":"Foam Wing \u00b7 JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Manning Puska, Fall 26 - T5\/C |  | Wing structure does not save. Have to restart design from scratch every time Foam Wing Design is opened.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Manning Puska","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"bdf9c2bbd95dd3dc","Submitted UTC":"2026-10-19T15:03:16Z","Reported Local Time":"10\/19\/2026, 9:01:11 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/154.0.0.0 Safari\/537.36 Edg\/154.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"lakshan, Fall 26 - M1\/A. The Ixx and Iyy and Izz values don't show enough decimal points for our values when the units where slugs\/ft^2. So we have around 0.01669 in Izz but when typed in, it shows 0. I think it might also be a fix to the sim if the simulator was allowed to manually enter these values ( Ixx and Iyy and Izz). This seemed to give us more accurate data with the flying qualities.","Steps to Reproduce":"Enter a small number in Ixx slot","Expected Behavior":"0.01669","Actual Behavior":"0","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"c125a481d4ea66b9","Submitted UTC":"2026-10-22T17:38:07Z","Reported Local Time":"10\/22\/2026, 11:36:29 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1366 x 768","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Inlet design","Expected Behavior":"To do a realistic s-duct design we need at least 6 control points.","Actual Behavior":"Only 3 control points like Jet","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"c37c70c14d54d023","Submitted UTC":"2026-10-23T16:29:20Z","Reported Local Time":"10\/23\/2026, 10:27:22 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Kirsten Lee, Fall 26 - M3\/A","Steps to Reproduce":"It would be nice for us to be able to add data callouts on the plots, like on the specific excess power graph, it would be nice to plot our max altitude and max mach","Expected Behavior":"works as expected; just requesting an improvement!","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"done","Resolution Updated UTC":"2026-10-23T22:05:10Z","Reporter User":"Kirsten Lee","Reporter Semester":"Fall 26","Reporter Section":"M3","Reporter Team":"A"},{"Report ID":"cbbccc07e20705eb","Submitted UTC":"2026-10-16T16:20:09Z","Reported Local Time":"10\/16\/2026, 10:19:43 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.13 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | Changing CG on the left panel does not change the pitching moment curve plot on the right for the wind tunnel data","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"its not supposed to.  that is your fullscale prediction.  change the \"Desired static margin\" to see a change.  that is based on the WT assessed NP","Resolution Updated UTC":"2026-10-24T16:02:26Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"ced4777a6b973b71","Submitted UTC":"2026-10-14T20:13:12Z","Reported Local Time":"10\/14\/2026, 2:01:00 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"Fuselage didn't import [properly from Jet.","Steps to Reproduce":"Drop Jet file and look at rendering.","Expected Behavior":"Looks like what's in Jet","Actual Behavior":"Fuselage is extended downward with vertical edge at nose.  See image I sent on Teams.  Also, no way to control zchine in JetCentral (at least I couldn't find it.)","Contact Email":"","Resolved":"true","Resolution Comments":"ca you send me the JET file doing this?  z Chine is forced to be coplanar.  you can adjust the top and bottom splines to do what I think you are getting at.","Resolution Updated UTC":"2026-10-16T00:43:52Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"d2eca8ce1538db8b","Submitted UTC":"2026-10-21T14:55:42Z","Reported Local Time":"10\/21\/2026, 8:55:27 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"christian demaster smith, Fall 26 - M1\/A","Steps to Reproduce":"Dorsal Rudder not Working","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-22T02:53:47Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"d37c46f8b1ace47b","Submitted UTC":"2026-10-19T15:17:53Z","Reported Local Time":"10\/19\/2026, 9:17:08 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/154.0.0.0 Safari\/537.36 Edg\/154.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"lakshan, Fall 26 - M1\/A. Iyy and Izz won't save to be overridden in JSON file on jetcentral","Steps to Reproduce":"Interia category","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-24T16:32:28Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"d66497a81bce8d57","Submitted UTC":"2026-10-21T16:09:18Z","Reported Local Time":"10\/21\/2026, 10:08:41 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Fitz, Fall 26 - M3\/C |  | Crash detected if perform a touch and go","Steps to Reproduce":"Set up landing normal, do a touch and go","Expected Behavior":"take off keep flying","Actual Behavior":"Paused for crash detected","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"d66dda130d16b2eb","Submitted UTC":"2026-10-22T22:24:27Z","Reported Local Time":"10\/22\/2026, 4:19:36 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 720","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"In A vs x plot, Ao should be a constant value.","Expected Behavior":"From inlet to exhaust the A - Ao line should be a constant value below the OML A vs x line.","Actual Behavior":"It appears that JetCentral is subtracting the area of the inlet from the OML for the A - Ao line instead.  That is wrong. Ao adjusts how much the flow must turn to go around the OML. Inlet area is not that.","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T15:58:18Z","Reporter User":"brandtsa","Reporter Semester":"Fall 26","Reporter Section":"T1","Reporter Team":"A"},{"Report ID":"d834403b64c3ea76","Submitted UTC":"2026-10-21T18:08:29Z","Reported Local Time":"10\/21\/2026, 12:06:40 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A | Digital Twin 1.0.3 strake shape is wrong in 3-D view","Steps to Reproduce":"3-D view (rotatable)","Expected Behavior":"Strake should look like strake in planform view.","Actual Behavior":"Strake does not look like strake in planform view.","Contact Email":"","Resolved":"true","Resolution Comments":"you are likely in LOW RES.  go to high res and it will not clip the end","Resolution Updated UTC":"2026-10-21T23:28:39Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"d985f6e3c5ab48b7","Submitted UTC":"2026-10-14T20:25:03Z","Reported Local Time":"10\/14\/2026, 2:22:54 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"JetCentral imports CCA mission no matter what is in jet","Steps to Reproduce":"Drop YF-22 or 5GAT or F-5E or NGAT start into JetCentral and compart mission with what was in Jet.","Expected Behavior":"JetCentral sho0ws the mission that was in Jet.","Actual Behavior":"JetCentral always shows a CCA mission","Contact Email":"","Resolved":"false","Resolution Comments":"that is not yet incorporated.  I will do that soon","Resolution Updated UTC":"2026-10-16T00:40:00Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"da19d8bb21aae0c9","Submitted UTC":"2026-10-22T17:19:21Z","Reported Local Time":"10\/22\/2026, 11:18:41 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.470 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | Could we get a button for AB jet sim? If 100% is with AB, could we get an indication of when it is on or off. Thank you!","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Peter","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"C"},{"Report ID":"dcbfa2055873c3c6","Submitted UTC":"2026-10-28T21:06:32Z","Reported Local Time":"10\/28\/2026, 3:06:19 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=cc8826c6b97c","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.41 \u00b7 2026-10-28","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Manning Puska, Fall 26 - T5\/C |  | check inertial moment calculations for small aircraft","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Manning Puska","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"ddd8599294d5bd5b","Submitted UTC":"2026-10-23T13:56:24Z","Reported Local Time":"10\/23\/2026, 7:56:04 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.563 \u00b7 2026-10-23","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"HAVOC, Fall 26 - M1\/D","Steps to Reproduce":"move gear in internal","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed","Resolution Updated UTC":"2026-10-26T15:57:25Z","Reporter User":"HAVOC","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"dddfa6187b20fd1c","Submitted UTC":"2026-11-03T16:44:30Z","Reported Local Time":"11\/3\/2026, 9:42:29 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d435635ee358","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | Adding more description to previous bug reported, the inlets on the plane are now changed so they fill in the entire area from the end of the engine to the front of the inlets. It makes it take a lot of space and doesn't actually reflect the inlet ducting. It is eating into volume and taking more fuel to fly.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Peter","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"C"},{"Report ID":"e6286dd01006e61f","Submitted UTC":"2026-10-21T18:17:12Z","Reported Local Time":"10\/21\/2026, 12:14:25 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"brandtsa, Fall 26 - T1\/A last fuselage point tied to z = 0","Steps to Reproduce":"Fuselage side view","Expected Behavior":"Last fuselage station should be adjustable vertically.","Actual Behavior":"Last fuselage station top side dot appears to be tied to zero.  Can't move it above zero.  Lower side dot can be moved above zero but not the top side. Chine line is also constrained by that.","Contact Email":"","Resolved":"true","Resolution Comments":"could not duplicate.  please send me your json and I will investigate","Resolution Updated UTC":"2026-10-21T23:33:39Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"ea11de7909e24743","Submitted UTC":"2026-10-14T15:39:48Z","Reported Local Time":"10\/14\/2026, 9:39:34 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Only see one name in my team","Steps to Reproduce":"\"Save As\" to create a record that makes your user exist","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-16T00:04:31Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"eb64db86d7e2d858","Submitted UTC":"2026-11-03T22:57:25Z","Reported Local Time":"11\/3\/2026, 3:56:24 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=d435635ee358","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"C29Joshua.Skeen, AE210 - C29JOSHUA.SKEEN\/A |  | When I click on internal design I cannot see anything and get the message: \"Error: Values must be finite JSON data\"","Steps to Reproduce":"Click on internal design","Expected Behavior":"Some kind of display to allow me to see the number of missiles on the aircraft","Actual Behavior":"Essentially empty page","Contact Email":"","Resolved":"true","Resolution Comments":"could not replicate","Resolution Updated UTC":"2026-11-06T23:48:12Z","Reporter User":"C29Joshua.Skeen","Reporter Semester":"AE210","Reporter Section":"C29JOSHUA.SKEEN","Reporter Team":"A"},{"Report ID":"eef8ed32064e1f12","Submitted UTC":"2026-10-26T23:21:03Z","Reported Local Time":"10\/26\/2026, 5:18:34 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.716 \u00b7 2026-10-25","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1920 x 1080","Description":"matt, Fall 26 - M1\/D | Wind Tunnel Model tool does not make proper supports for 2 section wings. it look like it builds the supports based on line from tip of the chord root to the wing tip root without factoring in multiple sections.","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"matt","Reporter Semester":"Fall 26","Reporter Section":"M1","Reporter Team":"D"},{"Report ID":"f2390d9ab75caa83","Submitted UTC":"2026-10-22T19:11:07Z","Reported Local Time":"10\/22\/2026, 1:09:54 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.510 \u00b7 2026-10-22","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1536 x 960","Description":"internal design tab doesn't work; gives error code \"Error: Unable to prepare a closed propulsion cutout.\"","Steps to Reproduce":"upload plane, internal design tab","Expected Behavior":"opens graphic to adjust internal design","Actual Behavior":"blank screen with error message \"Error: Unable to prepare a closed propulsion cutout.\"","Contact Email":"","Resolved":"true","Resolution Comments":"could not duplicate.  message me if this is still happening and give me your JET11 model so I can reproduce.  michael.nielsen.ctr@afacademy.af.edu","Resolution Updated UTC":"2026-10-24T15:45:20Z","Reporter User":"c27joseph.duran@afacademy.af.edu","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"B"},{"Report ID":"f382d7d9f6722a4c","Submitted UTC":"2026-10-19T19:58:52Z","Reported Local Time":"10\/19\/2026, 1:58:40 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"2560 x 1440","Description":"HAVOC, Fall 26 - M1\/D |  | engine negative mach munber","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"","Resolution Updated UTC":"2026-10-19T23:47:57Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"f6b0844e40a52443","Submitted UTC":"2026-10-19T16:51:28Z","Reported Local Time":"10\/19\/2026, 10:50:01 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Kirsten Lee, Fall 26 - M3\/A","Steps to Reproduce":"Can you make the shortened names for our data sets save?","Expected Behavior":"Works as expected; I just want something different","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"f77743c3a91198e1","Submitted UTC":"2026-10-16T16:47:08Z","Reported Local Time":"10\/16\/2026, 10:45:59 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.13 \u00b7 2026-10-15","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Hogeboom, Fall 26 - T3\/C","Steps to Reproduce":"touchdown and takeoff again","Expected Behavior":"after a touch and go, i put the landing gear up - caused a collision.","Actual Behavior":"should not cause collision. Also we found there are no brakes for the wheels that allow us to stop upon landing.","Contact Email":"","Resolved":"true","Resolution Comments":"should be fixed now","Resolution Updated UTC":"2026-10-22T02:01:04Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"f8378b31aafd5523","Submitted UTC":"2026-10-20T16:56:37Z","Reported Local Time":"10\/20\/2026, 10:55:37 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.288 \u00b7 2026-10-19","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | There is a visual gap when creating the mission legs","Steps to Reproduce":"Example Rows | Loiter | Dash | Combat | Cruise","Expected Behavior":"The graph should have a solid line after loiter oval","Actual Behavior":"There is a gap\/jump in the graphic","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"f99a2eae1d41f53a","Submitted UTC":"2026-11-02T23:32:05Z","Reported Local Time":"11\/2\/2026, 4:29:50 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=68ceb9fd0b77","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.125 \u00b7 2026-11-02","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"brandtsa, Fall 26 - T1\/A","Steps to Reproduce":"Couldn't find current Amax","Expected Behavior":"(Amax - Ao) is primary feedback when doing area ruling. Should be very visible in focused view.","Actual Behavior":"I couldn't find a value of Amax except the one in the Aero widget which said it was based on the Jet11 file.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"brandtsa","Reporter Semester":"Fall 26","Reporter Section":"T1","Reporter Team":"A"},{"Report ID":"fcf1de951a359620","Submitted UTC":"2026-11-03T14:33:50Z","Reported Local Time":"11\/3\/2026, 7:33:20 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?v=d435635ee358","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.139 \u00b7 2026-11-03","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"Peter, Fall 26 - T3\/C | The engine inlets are filling in too much. They don't stay as the S shaped inlets","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Peter","Reporter Semester":"Fall 26","Reporter Section":"T3","Reporter Team":"C"},{"Report ID":"fd6dca0e26c52b12","Submitted UTC":"2026-10-21T15:08:10Z","Reported Local Time":"10\/21\/2026, 9:07:36 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.6.398 \u00b7 2026-10-21","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1707 x 1067","Description":"christian demaster smith, Fall 26 - M1\/A","Steps to Reproduce":"3 inch shell around motors too large for small AC","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"fixed.  now a slider","Resolution Updated UTC":"2026-10-22T02:53:59Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"fd9d093933a78f81","Submitted UTC":"2026-10-14T16:46:24Z","Reported Local Time":"10\/14\/2026, 10:44:04 AM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.5.381 \u00b7 2026-10-14","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/155.0.0.0 Safari\/537.36 Edg\/155.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"The constraint diagram does not match the Jet file. The issue seems to be JETcentral counts the S_wet (Wetted Area) twice compared to the Jet file. (Jet value was 160ft^2 while JETcentral was 320 ft^2)","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"true","Resolution Comments":"solved.","Resolution Updated UTC":"2026-10-16T00:45:05Z","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"de472f40cbb7eab5","Submitted UTC":"2026-11-04T08:35:14Z","Reported Local Time":"11\/4\/2026, 1:35:06 AM","Page URL":"https:\/\/jetdesign.online\/","Page Title":"AE 481 \u00b7 Aircraft Design Learning Hub","Page Version":"","Browser":"Mozilla\/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit\/605.1.15 (KHTML, like Gecko) Version\/27.0 Safari\/605.1.15","Operating System":"MacIntel","Screen Size":"2560 x 1440","Description":"continuity check","Steps to Reproduce":"","Expected Behavior":"","Actual Behavior":"","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"","Reporter Semester":"","Reporter Section":"","Reporter Team":""},{"Report ID":"9788ce85ad1b519d","Submitted UTC":"2026-11-07T05:26:55Z","Reported Local Time":"11\/6\/2026, 10:22:51 PM","Page URL":"https:\/\/jet-central.net\/JETcentral\/Main.html?course=AE210&v=5796c8ffbe1c","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.194 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/157.0.0.0 Safari\/537.36 Edg\/157.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"C29Austin.Thompson, AE210 - C29AUSTIN.THOMPSON\/A | I plug in the same pin and password as used in previous iterations of the website and it causes it to give me an error telling me Website access is required. Open the website home page and sign in in this same browser, then return here and retry. The Team PIN is separate from website access.","Steps to Reproduce":"plug in C29Austin.Thompson to username and 1469 however on the old website https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=5796c8ffbe1c it works but on  | https:\/\/jet-central.net\/JETcentral\/Main.html?course=AE210&v=5796c8ffbe1c it does nto work","Expected Behavior":"logging in","Actual Behavior":"Website access is required. Open the website home page and sign in in this same browser, then return here and retry. The Team PIN is separate from website access.","Contact Email":"C29Austin.Thompson@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"C29Austin.Thompson","Reporter Semester":"AE210","Reporter Section":"C29AUSTIN.THOMPSON","Reporter Team":"A"},{"Report ID":"446b2d8128e87d2d","Submitted UTC":"2026-11-08T02:50:42Z","Reported Local Time":"11\/7\/2026, 7:47:01 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"3d model does not properly model y offset for horizontal stabilizers","Steps to Reproduce":"set the y offset to be a positive number or move the horizontal stabilizer so the roots of each horizontal stabilizer are not touching, then go to the aircraft preview.","Expected Behavior":"Horizontal stabilizer is where you designed or moved it to.","Actual Behavior":"Horizontal stabilizer displays x and z axis changes, but not y axis.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"cb71ae8774cf816d","Submitted UTC":"2026-11-08T02:54:48Z","Reported Local Time":"11\/7\/2026, 7:50:44 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"When using a main wing with two sections, they are counted as separate segments on the bug splat even though the angle is the same.","Steps to Reproduce":"Create a wing of two sections with the same LE sweep angle. Minimize the strake width to be less than the width of the inner wing. Go to the bug splat","Expected Behavior":"Wing LE creates one big thin radar return.","Actual Behavior":"Wing LE creates two small fat radar returns.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"00f48d8b7d95516a","Submitted UTC":"2026-11-08T02:58:09Z","Reported Local Time":"11\/7\/2026, 7:54:49 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Changing the length of the engine doesn't impact thrust.","Steps to Reproduce":"Set the engine thrust to a value. Change the length of the engine, but not the diameter. See the thrust produced.","Expected Behavior":"Either the thrust is slightly less, or the diameter scales with the length and thrust is reduced.","Actual Behavior":"no change in thrust or diameter","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"963d6a8b348ab62d","Submitted UTC":"2026-11-08T03:04:10Z","Reported Local Time":"11\/7\/2026, 7:58:09 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"The engine can be seen through the S ducts without creating a radar return.","Steps to Reproduce":"Shift the S ducts to a straight line of sight to the engine, you should be able to see the red of the engine through the intake on the aircraft preview. Move the horizontal stabilizers to a position where they extend and cover the exhaust, the nozzle should create a hole in the horizontal stabilizers.","Expected Behavior":"Large radar returns from angles where the engine can be seen from the intake and the rear.","Actual Behavior":"No radar returns from the engine in the front or the rear.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"e8c5149e2879bd45","Submitted UTC":"2026-11-08T03:06:57Z","Reported Local Time":"11\/7\/2026, 8:04:11 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"High negative SM appear green in the \u201cweight\u201d tab but not in the \u201cweight and balance\u201d tab","Steps to Reproduce":"Create an aircraft with a negative static margin for landing or takeoff. The weight and balance tab should be highlighted orange or red.","Expected Behavior":"Opening the Weight tab shows the takeoff\/landing SM as red.","Actual Behavior":"Opening the Weight tab shows the takeoff\/landing SM as green.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"5efcbfe2552294f7","Submitted UTC":"2026-11-08T03:11:36Z","Reported Local Time":"11\/7\/2026, 8:06:58 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"For various variables for the vertical stabilizers (like root x), changing them warps the whole shape.","Steps to Reproduce":"Create a vertical stabilizer and change root x. Click somewhere in the display to let the changes update.","Expected Behavior":"The wing shifts to the new x position without any changes in the shape of the wing.","Actual Behavior":"Almost everything changes.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"8fe9fe5331030ed7","Submitted UTC":"2026-11-08T03:14:45Z","Reported Local Time":"11\/7\/2026, 8:11:37 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"After committing an internal design, it counted double the weight and double the volume per missile. Did not happen the second time.","Steps to Reproduce":"Go to internal design. Delete all prior payloads. Spawn 6 Aim 120s one at a time, then position them. Commit the design.","Expected Behavior":"6 aim120s are calculated in the weight and volume.","Actual Behavior":"12 aim120s are calculated in the weight and volume, two per location.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"4214b03ed28af86a","Submitted UTC":"2026-11-08T03:21:33Z","Reported Local Time":"11\/7\/2026, 8:14:50 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"When fuselage volume is adjusted, it automatically puts fuel in the wings even if the fuselage has room to spare and the wings do not","Steps to Reproduce":"Go to volume tab and see how many lbs of fuel can fit in the wings and in fuel tank 1. Go to weight, and set the maximum weight in fuel for the wings, and significantly less than the maximum capacity for fuel tank 1. Adjust the fuselage so fuel tank 1 shrinks in volume. Go back to the volume tab.","Expected Behavior":"The wing fuel tank does not change percent filled because it is at max capacity. Only tank 1's capacity changes.","Actual Behavior":"Fuel percent is distributed to both tanks, pushing the wing fuel tank to over 100% full.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"aa569ba50f83ee96","Submitted UTC":"2026-11-08T03:26:28Z","Reported Local Time":"11\/7\/2026, 8:23:13 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Changing the fuselage cross section from chine to anything else and back shifts the entire fuselage.","Steps to Reproduce":"Click on the dropdown menu for the fuselage cross section. Select square and click the display to allow updates. Switch it back and click the display to allow updates.","Expected Behavior":"Fuselage is exactly what it was before switching the cross section.","Actual Behavior":"All points on the fuselage except for the nose point are shifted several feet down, including the tail point which cannot be shifted otherwise.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"72a43de94a8598f2","Submitted UTC":"2026-11-08T03:30:18Z","Reported Local Time":"11\/7\/2026, 8:30:06 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"The cost thumbnail does not update unless it is opened.","Steps to Reproduce":"Create an aircraft, open the cost tab then reduce it to the thumbnail size. Increase fuselage size or make any change to increase the cost. Wait for the thumbnail to update.","Expected Behavior":"Cost updates at\/about the same time as weight, volume, etc.","Actual Behavior":"Cost does not update while in thumbnail form, and only updates when in the expanded or medium view.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"0d6f17464e3126d9","Submitted UTC":"2026-11-08T03:35:44Z","Reported Local Time":"11\/7\/2026, 8:30:20 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Making a change to weight (or other variables) without changing anything else does not result in the same value of surplus\/defecit fuel after the weight is changed back. (does not always reproduce, but often does)","Steps to Reproduce":"Change the mission requirements until plane has a fuel deficit within 10 lbs of 0. Add 100 lbs to weight and wait for it to update. Subtract 100 lbs from weight and wait for it to update.","Expected Behavior":"Fuel deficit is what it was before adding and subtracting the fuel.","Actual Behavior":"Fuel is not what it was before adding and subtracting the fuel.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"ce87e9fdf879fe38","Submitted UTC":"2026-11-08T03:39:58Z","Reported Local Time":"11\/7\/2026, 8:35:45 PM","Page URL":"https:\/\/jetdesign.online\/JETcentral\/Main.html?course=AE210&v=dabd9dbefeca","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.204 \u00b7 2026-11-07","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36","Operating System":"Windows","Screen Size":"1536 x 864","Description":"The three view tab does not properly render 2 section wings.","Steps to Reproduce":"Create a wing with two sections where the TE sweep angle is different. Open the three view tab.","Expected Behavior":"The wing is modeled as designed and as shown on the 3d model.","Actual Behavior":"The wing connects the root points directly and linearly to the wingtip points, ignoring any change in sweep angle.","Contact Email":"c29casey.knapp@afacademy.af.edu","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"CaseyKnapp","Reporter Semester":"AE210","Reporter Section":"CASEYKNAPP","Reporter Team":"A"},{"Report ID":"f0138cdc0f7ea5bd","Submitted UTC":"2026-11-08T06:30:01Z","Reported Local Time":"11\/7\/2026, 11:23:48 PM","Page URL":"https:\/\/jet-central.net\/JETcentral\/Main.html?course=AE210&v=e945eb272771","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.159 \u00b7 2026-11-04","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/156.0.0.0 Safari\/537.36 Edg\/156.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"Andrew, AE210 - ANDREW\/A","Steps to Reproduce":"update the weight of the aircraft with the mission window fully expanded while looking at weight window as well.","Expected Behavior":"The mission window and how much weight it says you need and the weight window and how much it says you need are mirrored","Actual Behavior":"the mission window doesn't update until you save the version and then it tells you you're wrong","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Andrew","Reporter Semester":"AE210","Reporter Section":"ANDREW","Reporter Team":"A"},{"Report ID":"8f57ab5d69afc615","Submitted UTC":"2026-11-09T22:21:31Z","Reported Local Time":"11\/9\/2026, 3:20:35 PM","Page URL":"https:\/\/jet-central.net\/JETcentral\/Main.html?v=c51ff1f5fb2b","Page Title":"JETcentral \u00b7 Aircraft workspace","Page Version":"JETcentral v0.7.253 \u00b7 2026-11-09","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/157.0.0.0 Safari\/537.36 Edg\/157.0.0.0","Operating System":"Windows","Screen Size":"1536 x 864","Description":"Fregoso, Fall 26 - T5\/C","Steps to Reproduce":"\"H-Tail W\/ weight\" go into the sim and look at control deflections","Expected Behavior":"Sim recognizes the model is not a V tail.","Actual Behavior":"It still says V tail and is acting like a V tail","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"Fregoso","Reporter Semester":"Fall 26","Reporter Section":"T5","Reporter Team":"C"},{"Report ID":"accec738b622a5df","Submitted UTC":"2026-11-12T04:52:03Z","Reported Local Time":"11\/11\/2026, 9:50:09 PM","Page URL":"https:\/\/jet-central.net\/JETcentral\/Main.html?course=AE210&v=a04e1bdd1b0b","Page Title":"JETcentral \u00b7 AE210","Page Version":"JETcentral v0.7.273 \u00b7 2026-11-11","Browser":"Mozilla\/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit\/537.36 (KHTML, like Gecko) Chrome\/157.0.0.0 Safari\/537.36 Edg\/157.0.0.0","Operating System":"Windows","Screen Size":"1280 x 800","Description":"jinped29, AE210 - JINPED29\/A | JSON does not correctly save to my disk.","Steps to Reproduce":"Make any edits to the plane. | Press \"Save to Disk\" on \"My Aircraft\" section | Reload the website. | Press \"load from disk\" on \"My Aircraft\" Section.","Expected Behavior":"Edited Plane shows up with same data.","Actual Behavior":"Gives me old plane I made a couple weeks ago.","Contact Email":"","Resolved":"false","Resolution Comments":"","Resolution Updated UTC":"","Reporter User":"jinped29","Reporter Semester":"AE210","Reporter Section":"JINPED29","Reporter Team":"A"}]}